PimeOne
A carpet label printer developed by Afinia Label specifically for the needs of carpet manufacturers. Print your labels on demand, in your own facility, within minutes.
The next generation of Speedstar 3000 and iCube-3.
Production of the Speedstar 3000 and iCube-3, used for carpet label printing for years, has ended. PimeOne was developed by Afinia Label to replace them, together with Pime Label's experience in the field.
The result is a fast, simple and reliable printer designed around what carpet manufacturers actually need.
On-Demand Production
You can print short-run labels in minutes in your own facility without holding up orders, gaining big flexibility in small batches.
Liner-Less Material
All the polyester fabric we use for carpet labels is liner-less: no backing paper to peel, no waste, faster application.
100% Flexible
The label bends with the carpet and adapts to its flexibility.
Variable Data
Different size, quality, design code, barcode and order details on every label. No plates or prepress required.
Polyester Fabric & Consumables
Our own polyester fabric and original cartridges from stock; your production never waits.
24/7 Service
Installation, operator training and round-the-clock technical support for facilities running three shifts.
Print, place and apply.
Getting a label from print to carpet takes just a few minutes.
- PrintThe design and variable data are sent to PimeOne; liner-less polyester fabric carpet labels print at around 25 per minute.
- PlaceThe cut label is placed on the back of the carpet, with no backing paper to peel.
- ApplyIt is fixed with the method that best suits your production line: heat, sewing or self-adhesive.
The method that fits your production line.
With the same PimeOne, three application methods to suit the carpet type and your production line.
Heat
The label is heat-sealed in the press on the carpet production line, which is fast, clean and permanent.
- Temperature
- 150–180 °C
- Contact time
- ~2 seconds
Sewing
Sewn to the back or edge of the carpet in the traditional way, for manufacturers who prefer sewn labels.
Self-Adhesive
Applied directly by adhesion, with no heat or sewing equipment required.
PimeOne
- Manufacturer
- Afinia Label
- Print technology
- Memjet
- Print resolution
- 1600 × 1600 dpi
- Print width
- 216 mm
- Output
- ~25 carpet labels per minute
- Material
- Liner-less polyester fabric carpet label, made by Pime
- Application
- Heat (150–180 °C, ~2 s) · sewing · self-adhesive
- Installation & service
- Pime Label · 24/7 technical support
Let your collection show on its label.
Brand artwork, size, quality and care symbols, barcode and order details on one label.
See PimeOne in your facility.
Contact us for a test print and heat application with your own label.